The NEW 60 Equinox

This new bot was being built for Robo Games but was not finished.  

An attempt to build a new 60.

2 of these triangles make up one set of brackets for the lifter arm, and clamp jaw.  1/4 TI.  The base plate is 12x24. 

NO more messing around.  EV Gear 5:1 drive to 5x2 colsons. 

This actuator is 4" stroke, 75 pounds push/pull at 12v.  Going to run it at 24.  Good and fast at 24v

EBay is a great place.  The actuator and the TI pieces all came from there. 

Pillow blocks made.